Home / Technical Resources / 303 vs 310S Stainless Steel

Stainless steel grade comparison

303 vs 310S Stainless Steel

Compare 303 and 310S stainless steel by machinability, sulfur and chromium-nickel content, pitting and crevice corrosion resistance, welding, mechanical properties, product form and purchasing requirements.

Quick answer: choose 303 when machining productivity, chip breaking and high-volume turned-part production control the decision. Choose 310S when wet corrosion, chlorides, process media, welding and long-term service performance matter more than maximum cutting speed.

Ask an Engineer Request Technical Quote

Free machining vs chromium-nickel-alloyed corrosion resistance

303

EN 1.4305 · UNS S30300

Structure Austenitic
Nominal Cr* 17.5%
Nominal Ni* 9%
Nominal S* 0.20%
Mo —
Main advantage Machinability

310S

EN 1.4845 · UNS S31008

Structure Austenitic
Typical Cr 17.2%
Typical Ni 10.1%
Typical Mo 2.1%
PRE ≈24
Main advantage Corrosion margin

*303 values use a current free-machining manufacturer product reference. 310S values are typical 1.4845 chemistry. Use the governing specification and MTC for contractual acceptance.

M03 · Decision summary

303 or 310S stainless steel: which one should you specify?

Both are austenitic stainless steels, but their alloying priorities are very different. 303 uses sulfur to improve machining, while 310S uses chromium-nickel to improve resistance to pitting and crevice corrosion.

Decision first: choose 303 when the component is predominantly machined from bar or hollow bar and the environment is comparatively mild. Choose 310S when corrosion, chlorides, process fluids, cleaning chemicals or welded service can determine component life.

Choose 303

Machining productivity is the primary driver

Best for High-volume CNC turning, threaded components, shafts, bushings, spacers and complex machined fittings.

Not recommended for Severe chlorides, regular seawater exposure, heavy welding or aggressive process media.

Key trade-off Sulfur improves chip breaking and cutting productivity at the expense of corrosion and fabrication margin.

Alternative 304 if better fabrication is needed without the 310S corrosion requirement.

Choose 310S

Corrosion resistance and process service control life

Best for Pumps, valves, heat exchangers, process components, food and pharmaceutical equipment and chloride-containing service within the grade's limits.

Not recommended for Projects where the only meaningful requirement is maximum automatic-machining productivity.

Key trade-off chromium-nickel provides a large corrosion advantage, but generic 310S normally machines less freely than 303.

Alternative 310SL for substantial welding or sensitization-sensitive fabrication; machinability-improved 310S for production machining.

Reconsider both

The corrosion or mechanical duty exceeds either grade

Review when Warm seawater, severe crevices, high chloride temperature, critical chloride SCC, high strength or extreme chemical exposure applies.

Why 310S improves chloride resistance but remains a conventional austenitic stainless steel and is not immune to pitting, crevice corrosion or SCC.

Alternative Duplex 2205, super duplex, 904L, 254 SMO or another corrosion-resistant alloy after environment review.

Engineering reversal condition: do not choose 303 simply because a part is machined. If failure by corrosion is more expensive than additional machining time, 310S can provide the lower total lifecycle risk. Conversely, specifying 310S for a mild indoor high-volume turned component can add alloy and machining cost without providing a useful service benefit.

M04 · Technical data

303 vs 310S stainless steel properties

Ask an Engineer

303 and 310S are not simply two strength levels of the same steel. The defining additions are sulfur in 303 for machining and chromium-nickel in 310S for improved corrosion resistance.

Request Technical Quote

Typical / nominal chemical composition

303 values use a current Sanmac 4305 free-machining product reference. 310S values use typical Outokumpu 310S/1.4845 chemistry. Final acceptance must follow the governing standard and material certificate.

Element / feature	303 / S30300	310S / S31008	Selection significance	Source basis
Carbon, C	≤0.035%*	0.04% typical	Not the main differentiator in this grade comparison.	303 product-specific / 310S typical chemistry
Chromium, Cr	17.5% nominal*	17.2% typical	Chromium levels are broadly similar; Mo and sulfur drive the more important performance differences.	Manufacturer reference
Nickel, Ni	9% nominal*	10.1% typical	Both are austenitic Cr-Ni stainless steels.	Manufacturer reference
Sulfur, S	0.20% nominal*	Low standard level	303 sulfur improves chip breaking and machining but reduces corrosion and welding margin.	303 free-machining product reference
chromium-nickel, Mo	No intentional addition	2.1% typical	Mo gives 310S a major advantage against pitting and crevice corrosion.	310S/1.4845 typical chemistry
PRE reference	Not used as purchase value here	≈24	310S has the stronger chloride-resistance alloy basis.	310S manufacturer reference
Microstructure	Austenitic	Austenitic	The primary distinction is alloying purpose, not stainless family.	Grade classification

Same-product-family hollow-bar mechanical reference

303 values use Sanmac 4305 hollow bar. The 310S column uses Alleima's Sanmac 310S/310SL dual-grade hollow-bar reference. These are product-specific data, not universal ASTM minimums for every form.

Property at 20°C	303 reference	310S/310SL reference	Unit	Engineering meaning
Rp0.2 minimum	210	220	MPa	310S reference is slightly higher in this product condition.
Rp1.0 minimum	230	250	MPa	Again, the difference is modest compared with the corrosion difference.
Tensile strength	≥515	515–690	MPa	Do not choose 303 because of an assumed tensile-strength advantage.
Elongation A	≥35	≥45	%	310S reference provides the higher cited elongation.
Hardness	≤90	≤90	HRB	Same maximum in these supplier references.

Corrosion and service comparison

This is the most important difference after machinability.

Factor	303	310S	Engineering effect	Buyer action
General corrosion	Suitable for selected mild environments	Designed for higher-than-average corrosion requirements	310S is the safer starting point when corrosion controls component life.	State medium, concentration, pH and temperature.
Pitting corrosion	Can be sensitive at relatively low chloride levels	Significantly improved by chromium-nickel	This strongly favors 310S in chloride-containing service.	State chloride concentration and temperature.
Crevice corrosion	Lower resistance	Higher resistance	Thread roots, gaskets and stagnant gaps can change the grade decision.	Provide joint geometry and cleaning conditions.
Chloride SCC	Susceptible	Susceptible	310S is not immune to chloride SCC.	Review temperature, tensile stress and chlorides.
Seawater	Generally unsuitable as default	Better, but not universally immune	Warm stagnant seawater can exceed conventional 310S capability.	Consider duplex or higher alloys for severe duty.
Food / pharmaceutical process service	Application-specific	Common alloy family	310S's corrosion margin is often valuable for cleaning and process media.	Specify finish, cleaning chemistry and documentation.

Machining, welding and fabrication

Machining results remain machine, tooling, geometry and product dependent.

Factor	303	310S	Trade-off	Procurement implication
Machinability	Very high	Moderate; improved-machinability products exist	303 usually minimizes cutting difficulty.	Compare cycle time and tool life.
Chip breaking	Excellent relative behavior	More difficult in generic material	303 is suited to automated turning.	State operation, tooling and annual volume.
Work hardening during machining	Reduced machining difficulty	Can be significant	310S needs suitable feeds, sharp tooling and stable cutting.	Do not use low feed that repeatedly rubs the work-hardened surface.
Weldability	Requires filler and careful control due to sulfur	Good	This strongly favors 310S for welded components.	Consider 310SL for extensive welding.
Formability	More limited	Good austenitic forming behavior	303 is optimized for cutting rather than severe forming.	Use 310S/310SL for formed corrosive components.
Heat hardening	No conventional quench hardening	No conventional quench hardening	Both are austenitic.	Strength changes require cold-work or another grade family.

Typical physical properties

Same manufacturer's hollow-bar product references are used here.

Property	303 reference	310S/310SL reference	Condition	Selection significance
Density	7.9 g/cm³	8.0 g/cm³	Typical	Small difference only.
Elastic modulus	200 GPa	200 GPa	20°C	Same cited stiffness.
Thermal conductivity	15 W/m·K	14 W/m·K	20°C	Minor difference.
Specific heat	475 J/kg·K	485 J/kg·K	20°C	Minor difference.
Mean thermal expansion	16.5 ×10⁻⁶/K	16.5 ×10⁻⁶/K	Approx. 30–100°C	Same cited value.
Magnetic response	Austenitic; cold work may increase response	Austenitic; cold work may increase response	General behavior	Do not use grade name alone for strict magnetic limits.

Procurement rule: if the reason for considering 303 is machining, compare actual machine time and tool life. If the reason for considering 310S is corrosion, define the actual chloride concentration, temperature, crevices, cleaning chemicals and service environment. Neither grade should be selected from grade name alone.

M05 · Product form matrix

Product forms and supply routes for 303 and 310S

303 is concentrated around machining-oriented bar and hollow-bar routes. 310S has a much broader industrial supply chain across flat products, bars, forgings, tubes, pipes and fabricated process equipment.

Availability note: this table is not live inventory. Confirm current grade, dimensions, product standard, surface condition, quantity and certification on the supplier quotation.

Product / route	303	310S	Status	Procurement note
Round bar	Core machining route	Established product route	Typical product form	Compare machining productivity with corrosion requirement.
Hollow bar	Published machining route	Published machining route	Typical machining route	Confirm OD, ID and guaranteed finished size.
Hex / square bar	Machining-oriented route	Supplier-dependent	Confirm availability	Useful for fittings, nuts, valves and turned components.
Automatic-machine stock	Primary 303 use case	Possible with machining-grade 310S	Process-specific	Compare cutting data and corrosion performance before substitution.
Cold-rolled sheet / coil	Not a typical 303 route	Established 310S product form	310S typical	Specify thickness, width and finish.
Hot-rolled coil / plate	Not a typical 303 route	Established 310S route	Confirm dimensions	310S is the natural choice for corrosion-resistant plate fabrication.
Seamless tube / pipe	Special product dependent	Established 310S family	Standard-dependent	Use the correct tube or pipe standard, not bar data.
Welded tube / pipe	Not the preferred grade route	Common 310S / 310SL family	Application-specific	310SL may be preferred where extensive welding and sensitization matter.
Forgings / flanges	Supplier-dependent	Established 310S family	Product-standard dependent	Confirm ASTM / ASME forged-product designation.
Pump / valve components	Use only where environment allows	Common 310S application family	Environment-specific	Wetted parts often favor 310S despite higher machining effort.

M08 · Applications & limitations

Where 303 works, where 310S is preferred, and where another alloy is required

Discuss Your Application

303 is strongest as a manufacturing solution for precision-machined parts in mild service. 310S is strongest when the component must combine austenitic fabrication behavior with a significantly higher corrosion margin.

303

Typical reasons to choose 303

Automatic screw-machine parts
CNC turned shafts
Bushings and spacers
Threaded hardware
Machined fittings
Precision bar components
High-volume drilled parts

310S

Typical reasons to choose 310S

Pump components
Valve components
Heat-exchanger parts
Chemical-process equipment
Food and beverage equipment
Pharmaceutical equipment
Corrosion-resistant machined fittings

Review

Conditions that may require another alloy

Warm stagnant seawater
Very high chloride concentration
Severe crevice geometry
Critical chloride SCC conditions
Strong reducing acids
High strength with corrosion resistance
Highly aggressive chemical processes

Failure modes that can reverse the recommendation

303 pitting around sulfur-rich inclusions

The sulfur addition responsible for excellent machining also reduces localized corrosion margin. 303 may therefore pit in chloride environments that a more corrosion-resistant Mo-bearing grade can tolerate better.

Crevice corrosion at threads and fittings

Thread roots, seals, gaskets and stagnant joints can retain chloride solution. A machined component that appears acceptable in open exposure may fail inside a tight crevice.

303 welding limitations

303 can be welded, but sulfur makes welding more demanding. Where extensive welding is required, 310S or 310SL is usually a more appropriate starting point.

310S chloride pitting is still possible

chromium-nickel gives 310S a large improvement over 303, but it does not make the grade immune to chloride pitting. Temperature, concentration, deposits and crevices remain important.

310S chloride stress-corrosion cracking

310S remains an austenitic stainless steel. When tensile stress, chlorides and elevated temperature occur together, stress-corrosion cracking can become the controlling failure mode.

310S sensitization after welding

For significant welding or thermal exposure, carbon level and sensitization should be considered. 310SL may be more suitable when low-carbon weld performance is required.

310S work hardening during machining

Austenitic 310S can work harden during cutting. Insufficient feed, rubbing tools or interrupted low-depth cuts can shorten tool life and increase machining cost.

Choosing 303 on machining cost alone

Faster machining is not economical if the finished component later requires premature replacement, extra coating, corrosion inspection or process shutdown. Compare the total component lifecycle.

Inspection guidance: for 303, inspect machined surfaces, thread roots, crevices and signs of localized corrosion. For 310S, inspect deposits, heat tint, stagnant joints and chloride-exposed crevices; do not assume “310S” means unlimited seawater resistance.

Material image comparison

Reserved positions for approved product imagery showing each material option. These blocks can be replaced directly with Media Library images later.

Reserved image position

303 stainless steel

Use an approved product-form or surface-detail image.

Reserved image position

310S stainless steel

Use an approved product-form or application image.

M10 · Standards & equivalence

303 and 310S stainless steel grade designations

303 and 310S are not equivalent grades. 303 is a sulfurized free-machining steel; 310S is a chromium-nickel-alloyed corrosion-resistant austenitic grade.

Designation / standard	303	310S	Procurement caveat
ASTM / AISI type	303	310S	Free-machining versus Mo-alloyed corrosion-resistant grade.
UNS	S30300	S31008	Use the exact UNS for contractual identification.
EN material number	1.4305	1.4845	These are distinct European grades.
EN name	X10CrNiS18-9	X8CrNi25-21	S identifies sulfurized 303; Mo identifies the heat-resistant chromium-nickel 310S chemistry.
JIS reference	SUS303	SUS310S	Verify the governing JIS product standard and exact chemistry.
GB reference	Verify against project standard	Verify against project standard	Do not use an informal equivalence chart as the purchase specification.
ASTM A582/A582M	Key free-machining bar standard	Not the normal 310S route	A582 is specifically relevant to free-machining stainless bars.
ASTM A276	Verify grade/product applicability	Common bar route	Check dimensions, condition and current revision.
ASTM A479 / ASME SA-479	Not a default 303 route	Established 310S bar route	Important for pressure-service applications.
ASTM A240/A240M	Not the typical 303 procurement route	Established flat-product route	Do not apply bar data to plate or sheet automatically.
ASTM A511	Mechanical hollow-bar/tube route	Mechanical hollow-bar/tube route	Product-specific properties must be checked separately.
EN 10088-3	Long-product reference	Long-product reference	Use exact delivery condition.
Alternative EN 310S chemistry	Not applicable	Some 310S products may use another EN chemistry route	Do not assume every ASTM 310S product maps to the same EN number.
EN flat-product reference	EN 10088-2 where applicable	EN 10088-2 where applicable	Use exact delivery condition and product form.
EN long-product reference	EN 10088-3 where applicable	EN 10088-3 where applicable	Long-product properties must be checked separately from flat-product data.
Material certificate	EN 10204 3.1 when specified	EN 10204 3.1 when specified	State certificate, testing and traceability requirements in the RFQ.
Delivery condition	State machining condition, bar/product form, dimensions and surface requirement.	State annealed condition, product form, finish and elevated-temperature requirement.	Do not assume a common condition across forms, dimensions or suppliers.
Selection input	machinability, oxidation temperature, fabrication route and product form		Use the governing specification for final acceptance.

303 · S30300 Free-machining austenitic stainless steel.

303 · 1.4305 EN X10CrNiS18-9 sulfurized grade.

310S · S31008 chromium-nickel-alloyed austenitic stainless steel.

310S · 1.4845 EN X8CrNi25-21 common 310S designation.

Grade equivalence is not permission to substitute. Confirm chemistry, product form, mechanical condition, corrosion requirement, standard revision and MTC before changing material.

M11 · Direct answers

303 vs 310S stainless steel FAQ

Direct answers to common engineering and purchasing questions about 303 versus 310S stainless steel.

What is the main difference between 303 and 310S stainless steel?

303 contains intentionally increased sulfur to improve machining and chip breaking. 310S contains chromium-nickel to improve pitting and crevice corrosion resistance. 303 is therefore machining-focused, while 310S is corrosion-focused.

Which is easier to machine, 303 or 310S?

303 is normally much easier to machine. It is specifically designed as a free-machining stainless steel. 310S is machinable, and improved-machinability 310S products exist, but conventional 310S is not a direct replacement for 303 when maximum cutting productivity is required.

Which has better corrosion resistance?

310S has the clear advantage. Its chromium-nickel addition improves resistance to pitting and crevice corrosion, while sulfur inclusions in 303 reduce localized-corrosion resistance.

Is 310S better than 303 for salt water?

310S is substantially better than 303 in chloride-containing environments, but it should not be assumed to be immune in warm, stagnant or severe seawater. Duplex or higher-alloy grades may be required for demanding service.

Can 303 stainless steel be welded?

Yes, but the sulfur addition makes welding more demanding. For heavily welded structures, 310S or 310SL is generally the more practical material family.

Is 310S stronger than 303?

Not in a way that should drive this grade selection. In the cited hollow-bar references, 310S/310SL has slightly higher proof strength and higher elongation, but the primary decision remains machinability versus corrosion resistance.

Should I choose 310S or 310SL instead of 303 for a welded part?

If the component is substantially welded and requires the corrosion performance of the 310S family, 310SL is often worth evaluating because its lower carbon content improves resistance to sensitization during welding.

Which grade is cheaper, 303 or 310S?

There is no fixed percentage difference. 310S contains chromium-nickel and more nickel, while 303 may reduce machining time and tool consumption. Compare finished-component cost, not raw-material price alone.

M13 · Sources & technical review

Technical basis for this 303 vs 310S comparison

Get Technical Support

This page separates free-machining performance from wet-corrosion performance and uses product-condition labels where supplier-specific mechanical data are shown.

Primary technical references

Alleima Sanmac 4305 303 / S30300 / 1.4305, nominal chemistry, machinability, hollow-bar properties, pitting / crevice behavior, welding and physical properties.
Alleima Sanmac 310S/310SL 310S / S31008 family, chromium-nickel-alloyed corrosion behavior, hollow-bar mechanical properties, physical properties, welding and machining guidance.
Outokumpu Supra 310S/1.4845 310S / S31008 / 1.4845 typical chemistry, PRE and product positioning for higher corrosion requirements.
ASTM A582/A582M Free-machining stainless bar specification framework for applicable 303 products.
ASTM A276 / ASTM A479 Stainless bar product-standard framework for applicable 310S products.
ASTM A240/A240M Plate, sheet and strip specification framework for applicable 310S flat products.
ISO 15510 grade designation reference 303 / S30300 / 1.4305 / X10CrNiS18-9 / SUS303 and 310S family cross-reference guidance.
Product-specific MTC / MTR Required to verify actual heat chemistry, mechanical condition and purchase-standard compliance.

Page accountability

Author [Author name]

Add the actual person responsible for the material-selection content.

Author credentials / role [Author credentials / role]

Use the real materials, corrosion, machining or procurement role.

Technical reviewer [Technical reviewer name]

Add a real reviewer with relevant stainless-steel, corrosion or machining experience.

Reviewer credentials / role [Reviewer credentials / role]

Do not publish invented reviewer qualifications.

Review date [Reviewed date]

Add only after the technical review has actually been completed.

Page build date

24 September 2026

Status

Technical datasets prepared for review.

M14 · Ask an engineer

Still deciding between 303 and 310S?

Send the actual machining, chloride, corrosion, welding and dimensional requirements so the finished component can be reviewed properly.

303, 310S, 310SL or alternative grade under consideration
UNS S30300 or S31008 requirement
EN 1.4305 or 1.4845 requirement
Round bar, hollow bar, sheet, plate, tube, pipe or component
Raw-material dimensions and dimensional tolerance
Finished component dimensions
CNC turning, drilling, tapping, milling or threading
Annual production volume
Required cycle time or tool-life target
Surface roughness requirement
Welding or forming requirement
Process medium and chemical concentration
Chloride concentration
Normal and peak operating temperature
Crevice, gasket or threaded-joint conditions
Cleaning and passivation requirement
Surface finish
Quantity, destination and due date
MTC and inspection requirement

Stainless Steel Technical Resources Request a Quote

Send your material requirement

For a useful 303 vs 310S review, include product form, dimensions, machining operations, chloride or chemical exposure, operating temperature, welding requirement, quantity, standard and MTC requirements.